Our standard lumber products are stocked rough sawn, but we offer surfacing options if you prefer to purchase lumber already dressed (planed).
The surfacing charge per board foot is displayed with each option. Minimum surfacing charge is $100 per order. You may combine several items for surfacing to reach the $100 surfacing minimum.
Board footage tally is calculated according to the rough sawn dimensions of the lumber; The surfacing options are a value added service and will be charged in addition to the standard rough sawn board foot pricing.
The options for surfacing are as follows:
Skip Surfaced - lumber is surfaced to 1/16" to 1/8" under nominal thickness (i.e. 6/4 ≈ 1-7/16"); Some rough sawn spots are likely to be present, but lumber will generally be flat and straight. This is an economical option for workshops seeking to minimize shop and wood waste by reducing the amount of surfacing required.
SLR-1E - the lumber will have one edge straight line ripped (SLR). This option is only available if Skip Surfacing is selected.
S2S - lumber is fully surfaced on both the top and bottom face; Surfaces will be virtually free of rough sawn spots, and will generally be flat and straight. Both edges are rough sawn.
S3S - lumber is fully surfaced on both the top and bottom face as well as on one edge; Surfaces will be virtually free of rough sawn spots, and will generally be flat and straight. One edge is rough sawn.
S4S - lumber is fully surfaced on all four sides; Surfaces will be virtually free of rough sawn spots, and will generally be flat and straight.
We are fully equipped to produce custom profiles such as T&G, mouldings, trim, flooring, and any other custom millwork request. Please contact us for a quote if you require a custom profile produced to your specifications: sales@sflumber.com - 613-363-1222
Please note: All custom millwork orders are subject to a $1000 minimum and a $250 setup fee (waived for orders over $10,000).